Kurylko N. Automation of a Wind Power Plant to Improve Its Efficiency and Dynamic Characteristics

Українська версія

Thesis for the degree of Doctor of Philosophy (PhD)

State registration number

0826U005455

Applicant for

Specialization

  • 151 - Автоматизація та комп’ютерно-інтегровані технології

Specialized Academic Board

PhD 17225

Lviv Polytechnic National University

Essay

The dissertation addresses the topical scientific task of improving the efficiency and dynamic characteristics of active and reactive power control of a wind power plant (WPP) on the basis of a scalable multi-turbine model, a method for identifying its parameters, a power dispatch method at the plant controller level, and a model-based procedure for implementing the controller on target platforms. The plant-level controller coordinates the distribution of active and reactive power among turbines and ensures compliance with transmission system operator commands at the point of common coupling. Developing its algorithms requires a model that combines an individual description of each turbine with computational efficiency: aggregated models do not reproduce individual turbine behaviour, while detailed electromechanical models are impractical for long scenarios with dozens of turbines. The transition from a controller model to industrial deployment also remains fragmented. A scalable WPP model is developed in which each turbine is described by its power curve and first-order lags with mode-dependent time constants for active (TP, TPL) and reactive (TQ) power, taking into account PQ-capability limits, electrical losses and the turbine state machine. The model is complemented by a stochastic correlated wind field generator based on the Ornstein–Uhlenbeck process. It is parameterised by about 20–25 parameters, is suitable for 5–30 min scenarios with dozens of turbines, and scales linearly in computational cost. Validation against the NREL 5 MW reference model showed a normalised error not exceeding 4.2% in unconstrained operation and 0.02% under power curtailment. A structured method for identifying the model time constants is proposed: TP from the turbine response to turbulent wind and TPL from a step change of the power limit. The method requires no detailed aerodynamic or electromechanical turbine data and captures the dependence of TP on mean wind speed and turbulence intensity. The method of active and reactive power dispatch at the WPP controller level is improved to account for the individual available power, PQ-capability constraints and command rate-of-change limits of each turbine. For active power, a two-phase algorithm based on proportional-ramp dispatch is synthesised, combining fast distribution during the transient with load redistribution in steady state; for reactive power, a dispatch algorithm based on individual limits Qmin,i and Qmax,i is developed for the Q, cos φ and U control modes. Simulation of a 50 MW WPP for three curtailment levels (30, 50 and 75%) confirmed the effectiveness of the algorithm: at 75% curtailment, the 2%-band settling time decreased from 62.8 to 29.1 s and overshoot from 7.1 to 0.1%. A model-based implementation procedure for the controller is developed: from a MATLAB/Simulink model through automatic C/C++ code generation to DLLs compliant with the Annex G interface of IEC 61400-27-2 and compatible with DIgSILENT PowerFactory and PSCAD. Parallel verification of the model and the DLL confirmed their computational equivalence, ensuring a single code base from simulation to industrial deployment. The results have been implemented at MITA-TEKNIKA LLC and in the educational process of the Department of Automation and Computer-Integrated Technologies, Lviv Polytechnic National University.

Research papers

Kurylko N., Fedoryshyn R. Modern strategies for controlling wind power plants: technologies, challenges and prospects // Енергетика та системи керування. – 2024. – Vol. 10, № 1. – P. 56–63. DOI: 10.23939/jeecs2024.01.056.

Курилко Н. В., Федоришин Р. М. Модельно-орієнтоване проєктування та міжплатформне впровадження контролерів вітрових електростанцій // Наукові нотатки : міжвузівський збірник (за галузями знань «Технічні науки»). – 2025. – Вип. 82. – С. 76–83. DOI: 10.36910/775.24153966.2025.82.13.

Курилко Н. В., Федоришин Р. М. Побудова масштабованої моделі вітроелектростанції для тестування контролера верхнього рівня // Наукові праці Вінницького національного технічного університету. – 2025. – № 4. – С. 11–26. DOI: 10.31649/2307-5376-2025-4-11-26.

Курилко Н. В., Федоришин Р. М. Сучасні стратегії та технології управління вітровими електростанціями // Прогресивні напрямки розвитку автоматизованих технологічних комплексів : збірник наукових праць VIII Міжнародної науково-технічної конференції з проблем вищої освіти і науки (Луцьк, 28–30 травня 2024 р.). – 2024. – С. 34–35.

Курилко Н. В., Федоришин Р. М. Модельно-орієнтований підхід до розробки систем керування вітровими електростанціями з інтеграцією в галузеві симулятори // Відновлювана енергетика та енергоефективність у XXI столітті : матеріали XXVI Міжнародної науково-практичної конференції (Київ, 21–23 травня 2025 р.). – 2025. – С. 345–346. DOI: 10.36296/renewable.conf.21-23.05.2025.

Курилко Н. В., Федоришин Р. М. Методологія швидкої ідентифікації динамічних моделей вітрових електростанцій // Оптимальне керування електроустановками (ОКЕУ-2025) : матеріали VI Міжнародної науково-технічної конференції (Вінниця, 22–23 жовтня 2025 р.). – 2025. – С. 182–183. ISBN 978-617-8163-64-8.

Files

Similar theses