Yakubov C. Increase in wear resistance of the high-speed cutters via directed transformation of their initial properties

Українська версія

Thesis for the degree of Candidate of Sciences (CSc)

State registration number

0404U003240

Thesis Registration Form

0404U003240.pdf

Applicant for

Specialization

  • 05.03.01 - Процеси механічної обробки, верстати та інструменти

01-07-2004

Specialized Academic Board

Д 64.050.12

National Technical University "Kharkiv Polytechnic Institute"

Essay

Mashining process and wear at application cutting fluid. Increase of a wear resistance быстрорежущих of tools by directional transformation of their initial properties during run in by cutting under conditions of the minimized consumption cutting fluid. The methods of researches base on original positions of the theory of cutting, strength, wearing, physical-mechanical theory of contact interplay. The new gear of operating cutting fluid (lubricating - cooling medium causing a level of increase of normal stresses is established enhance deformation processes on working surfaces of the tool, providing in optimum conditions formation of contact layers of a heightened wear resistance). On the basis of an estimation of greasing operating cutting fluid the new pathes of their effective utilization are established. A field of application - mechanical engineering.

Read more

Files

Avtoreferat-Avtoreferat.doc

Avtoreferat-Titul.doc

Disertasiya-Obshie_vivodi.doc

Disertasiya-Razdel_1.doc

Disertasiya-Razdel_2.doc

Disertasiya-Razdel_3.doc

Disertasiya-Razdel_4.doc

Disertasiya-Razdel_5.doc

Disertasiya-Spisok_istochnikov.doc

Disertasiya-Titul.doc

Disertasiya-Vvedenie.doc

Similar theses

0422U100196

Chumak Anatolii O.

Increasing the stability of tools made of superhard composites of cubic boron nitride of the BL group during the final blade processing of hardened steels

0421U104076

Studenets Sergii F.

Improving the performance of cutting broaches from high-speed steels for processing cast iron parts by modifying the surface layer by hydrogen-free ion nitriding

0421U103727

Donchenko Yevhenii Ivanovych

Improving the efficiency of milling based on the development and research of an automated diagnostic system for cutters

0421U103674

Kamchatna-Stepanova Kateryna Valeriivna

Improving the efficiency of mechanical processing of hardened large-module chevron wheels during high-speed gear milling

0521U101862

Chumachenko Tatiana

Controlling the grinding process by controlling the cutting temperature