Titarenko O. Quality maintenance of the surface layer of thermoplastic polymeric materials during the semi finished machining stage

Українська версія

Thesis for the degree of Candidate of Sciences (CSc)

State registration number

0408U001748

Thesis Registration Form

0408U001748.pdf

Applicant for

Specialization

  • 05.03.01 - Процеси механічної обробки, верстати та інструменти

27-03-2008

Specialized Academic Board

Д 64.050.12

National Technical University "Kharkiv Polytechnic Institute"

Essay

Object - process of face-milling of thermoplastic polymer materials; aim - to ensure the required quality of surface layer at the stage of semifinish processing of thermoplastic polymer materials owing to creation of rational thermophysical conditions in the cutting zone; methods - states of cutting theory, theory of heat transfer, thermodynamics and mechanics of materials with disordered structure, methods of recording of infrared radiation and thermal signals, finite element method, electronic scanning microscopy, profilometry, differential scanning calorimetry; results - scientifically grounded choices of cutting mode parameters, material and geometry of tool at processing by milling of polystyrene and polymethylmethakrylat products for optical purposes; novelty - a new approach to the selection of rational parameters of milling parameters at thermoplastic polymer materials, which ensures the stability of their physical and mechanical properties at the stage of semifinish processing and increase productivity; introduction - at the Kharkov state aircraft manufacturing plant; branch - aeronautical and chemical engineering.

Read more

Files

Razdel 1--Раздел 1.doc

Razdel 1--Рис.1.4.doc

Razdel 1--Рисунки к разделу 1.doc

Razdel 1--Таблица 1.1.doc

Razdel 2--Раздел_2.doc

Razdel 2--Рис_2.1.doc

Razdel 2--Рис_2.12.doc

Razdel 2--Рис_2.12.doc

Razdel 2--Рис_2.2-2.15.doc

Razdel 2--Рис_2.2-2.15.doc

Razdel 2--Таблица_2.2-2.5.doc

Razdel 3--Раздел 3.doc

Razdel 3--Рис_ 3.2.doc

Razdel 3--Рис_3.1.doc

Razdel 3--Рис_3.3.doc

Razdel 3--Рисунки к разделу 3_1.doc

Razdel 3--Таблица 3.1 - 3.2.doc

Razdel 3--Таблица 3.3 - 3.5.doc

Razdel 4--Раздел 4.doc

Razdel 4--Рисунки к разделу 4.doc

Razdel 4--Рисунки к разделу 4.doc

Razdel 5--Раздел 5.doc

Razdel 5--Рисунки разд_5_1.doc

Razdel 5--Таблица 5.1 - 5.4.doc

Razdel 5--Таблица 5.5.doc

Автореферат.doc

ВВЕДЕНИЕ.doc

ЛИТЕРАТУРА.doc

Общие выводы.doc

Перечень условных сокращений.doc

Приложения.doc

СОДЕРЖАНИЕ.doc

Титульный лист.doc

Similar theses

0422U100196

Chumak Anatolii O.

Increasing the stability of tools made of superhard composites of cubic boron nitride of the BL group during the final blade processing of hardened steels

0421U104076

Studenets Sergii F.

Improving the performance of cutting broaches from high-speed steels for processing cast iron parts by modifying the surface layer by hydrogen-free ion nitriding

0421U103727

Donchenko Yevhenii Ivanovych

Improving the efficiency of milling based on the development and research of an automated diagnostic system for cutters

0421U103674

Kamchatna-Stepanova Kateryna Valeriivna

Improving the efficiency of mechanical processing of hardened large-module chevron wheels during high-speed gear milling

0521U101862

Chumachenko Tatiana

Controlling the grinding process by controlling the cutting temperature